The Vortex Blastair Air Cannon

The Vortex Blastair® air cannon was designed and engineered by European experts and is
currently manufactured and tested in a production facility located in Asia.

Features and Benefits

  • External T-shape Valve for easy inspection
  • Can retrofit any existing air blaster / air cannon
  • Metal to metal construction for added durability
  • More powerful thanks to a unique 'venturi effect' exhaust design
  • Robust cast iron design for reliability and durability
  • Can perform at a minimum 4 bar operating pressure
    (Recommended operating pressure of 5 to 7 bar or 75 to 100 PSI)
  • Galvanized tank (inside and outside) with polyurethane black paint
  • Provision for isolation valve, drainage valve, and/or pressure
    gauge for even safer operation
  • Wide range and availability of parts and accessories

Parts and Accessories

Staminair Corporation provides a complete line of accessories for its Vortex Blastair®  air cannons range.
Below is a list of accessories currently available for our air blasters.

product

Refractory Stainless Steel Nozzles

Refractory stainless steel nozzles (up to 1200 deg. C resistant) available in DN100 (4 ') or DN150 (6 ') to equip the Vortex Blastair® for specific applications such as in riser duct corners, kiln inlet side walls….etc.

product

Blowing Pipes

For easy connection and bolting, the blowing pipes with PN standard flanges comes in DN50 (2'), DN100 (4') and DN150 (6') as according to the Vortex Blastair® size.

product

Air FL Group Unit

The air FL group unit (1') facilitate continuous internal lubrication of all-metal parts of the Vortex Blastair®. An average number of ten (10) Vortex Blastair®, located on the same network level can be fitted with one (1) air FRL group unit.

product

Quick Release Valve (QRV)

The Quick Release Valve (QRV) is designed to maximize air flow at the Vortex Blastair® rear chamber. Made of aluminium for durability, its diaphragm can withstand high temperature operation.

product

Safety Control Unit

The Safety Control Unit allows technical operators to safely control the Vortex Blastair® at anytime: 1) Isolate it pneumatically from its network 2) Safely purge its pressure vessel if required and 3) Control and check operating air pressure at all times

product

Sequencer Panel

The sequencer panel, automatically organizes the blasting sequence of multiple Vortex Blastair® units.Its friendly design and usage allow for easy sequence changes and allow manual blasting.